The new LUBRICATORS are now available


Lubrication of cable and duct/microduct has a large beneficial effect on cable jetting (blowing), increasing significantly the achievable installation distance.

The Plumett cable Lubricators (patented) are easy to use and result in high efficiency in cable installation

L4 - The smallest one is non-dividable and is coupled inline with the duct. It can be used to lubricate cables from DIA 0.8 mm to 4 mm in microducts from OD 3 to 12 mm.

L9 - The medium one is dividable, equipped with a lubricant reservoir and is attached to the jetting equipment. It can be used to lubricate cables from DIA 1 mm to 9 mm in microducts from OD 4 to 16 mm.

L18 - The large one is also dividable, contains a lubricant reservoir and is coupled in-line with the duct. It can be used to lubricate cables from DIA 4 mm to 18 mm in microducts/ducts from 7 to 50 mm.

It has been found that the cable lubricators also help against static electric charging of the cable, a well known problem for small optical cables (< 2 mm diameter).

» http://www.plumettaz.com/web.nsf/produits_list.xsp?c1=cable-laying-products&c2=pose-de-cables-par-jetting