Telecom pictogram

Telecom

Logo of Figaro
Figaro Figaro

Figaro

Figaro

The Figaro is a useful accessory to the "Jetting" system allowing to increase your daily production, particularly when the total drum length to be installed exceeds the installation capacity of the available "Jetting" unit(s).

For cables Ø 4 to 24 mm

Advantages of the Figaro:

  • easy portability
  • set-up by two persons
  • one person operation
  • no time consuming and cumbersome “figure-eighting” which requests three-four persons
  • doubles the installation per “Jetting” unit and compressor

Figaro Additional Advantages:

Due to the open storage basket the Figaro can also be used as an “end storage device” Overlength cable can be stored directly into the Figaro at the end of the duct route After turning over the stored cable the installation can be continued in the same direction

using a cable storage means that the cable installation starts at an intermediate point of the duct route:

1st step: install the maximum length of cable in one direction
2nd step: uncoil the cable from the drum into the cable storage device
3rd step: install the rest of the cable into the opposite direction

Characteristics

Type Figaro
Application OptiJet™ / IntelliJet™ / MiniJet™ / CableJet™ / SuperJet™
Cable dia. [mm] 6-24
Speed of pay-in cable [m/min] 125
Overall diameter of apparatus [mm] 2275
Quantity of parts for transport (partially dismantled) 4
Length, in transport position [mm] 2300
Width, in transport position [mm] 1550
Height, in transport position [mm] 1600
Total shipping weight [kg] 160
Type Figaro
Application OptiJet™ / IntelliJet™ / MiniJet™ / CableJet™ / SuperJet™
Cable dia. [mm] 6-24
Speed of pay-in cable [m/min] 125
Overall diameter of apparatus [mm] 2275
Quantity of parts for transport (partially dismantled) 4
Length, in transport position [mm] 2300
Width, in transport position [mm] 1550
Height, in transport position [mm] 1600
Total shipping weight [kg] 160