Dramatically improve "Jetting" performances with this accessory when ambient temperatures exceed 20°C (68°F). This accessory is highly recommended to increase distance, installation speed, and reduce the potential of cable damage due the undue influence of high heat on cable jackets.
Air-air exchanger using the ambient air as cooling medium. The compressed air drives the fan which propels the ambient air
Placed between the compressor and the Jetting machine, it limits the temperature of compressed air to max. 10°C (50°F) above the ambient temperature avoiding the inconveniences created by overheated air
Without aftercooler, the temperature of compressed air exiting the compressor is approx. 35°C (95°F) above the ambient temperature. Warm air above 55°C (130°F), is softening the cable jacket and the duct wall, thus increasing the coefficient of friction between cable and duct. This will result in a lower installation speed, shorter installed cable lengths and increased risk of duct bursting.
Advantages :
Standard version | Air after cooler |
Type | AC-12 |
Application | Intelli-MicroJet / MicroJet / IntelliJet / MiniJet / CableJet / SuperJet |
Max. air consumption of motor [m3/min] | 0.85 (at 7 bar) |
Max. working pressure [bar] | 12 |
Max. air flow [m3/min] | 12 |
Max. air inlet temperature [°C] | 100 |
Max. air pressure at the motor [bar] | 7 |
Max. pressure drop [bar] | 0.3 |
Dimension of apparatus l x w x h [mm] | 680 x 420 x 580 |
Total weight [kg] | 49 |
Standard version | Air after cooler |
Type | AC-12 |
Application | Intelli-MicroJet / MicroJet / IntelliJet / MiniJet / CableJet / SuperJet |
Max. air consumption of motor [m3/min] | 0.85 (at 7 bar) |
Max. working pressure [bar] | 12 |
Max. air flow [m3/min] | 12 |
Max. air inlet temperature [°C] | 100 |
Max. air pressure at the motor [bar] | 7 |
Max. pressure drop [bar] | 0.3 |
Dimension of apparatus l x w x h [mm] | 680 x 420 x 580 |
Total weight [kg] | 49 |